87212A 1.REMOVE REAR NO. 1 AIR DUCT
Remove the 5 screws and rear No. 1 air duct.
87138R 2.REMOVE REAR HEATER BLOWER RESISTOR
| *1 | Clamp |
Disconnect the connector and 2 clamps.
Remove the 2 screws and rear heater blower resistor.
87105R 3.REMOVE REAR HEATER BLOWER FAN SUB-ASSEMBLY
| *a | Cut |
Cut the packing where the blower case sub-assembly and end plate sub-assembly meet.
Remove the 4 screws and blower case sub-assembly.
Remove the nut and rear heater blower fan sub-assembly.
Remove the washer.
87104R 4.REMOVE REAR HEATER BLOWER MOTOR SUB-ASSEMBLY
Remove the 3 screws and rear heater blower motor sub-assembly.
5.REMOVE REAR HEATER UNIT
| *a | Cut |
Cut the packing where the hose bracket and blower case sub-assembly meet.
Remove the screw and hose bracket.
Remove the screw and rear heater unit.
87240H 6.REMOVE WATER UNIT VALVE ASSEMBLY
Remove the screws and clamp clip.
Remove the water unit valve assembly.
87107R 7.REMOVE REAR HEATER UNIT SUB-ASSEMBLY
Remove the rear heater unit sub-assembly.