Home › Vehicle Interior › HEATING / AIR CONDITIONING › REAR HEATER UNIT(for Console Box)
RM25T0E _58 Vehicle Interior _029469 HEATING / AIR CONDITIONING _0137773 REAR HEATER UNIT(for Console Box) A

HEATING / AIR CONDITIONING  REAR HEATER UNIT(for Console Box)  REASSEMBLY  


PROCEDURE

Hide 87107R 1.INSTALL REAR HEATER UNIT SUB-ASSEMBLY

a.

Install the rear heater unit sub-assembly.


Hide 87240H 2.INSTALL WATER UNIT VALVE ASSEMBLY

a.

Install the water unit valve assembly.


b.

Install the clamp clip with the screw.


Hide 3.INSTALL REAR HEATER UNIT

a.

Install the rear heater unit with the screw.


b.

Install the hose bracket with the screw.


Hide 87104R 4.INSTALL REAR HEATER BLOWER MOTOR SUB-ASSEMBLY

a.

Install the rear heater blower motor sub-assembly with the 3 screws.


Hide 87105R 5.INSTALL REAR HEATER BLOWER FAN SUB-ASSEMBLY

a.

Install the washer.


b.

Install the rear heater blower fan sub-assembly with nut.

Torque:
2.8 N*m (29 kgf*cm, 25 in.*lbf)


c.

Install the blower case sub-assembly with the 4 screws.


Hide 87138R 6.INSTALL REAR HEATER BLOWER RESISTOR

a.

Install the rear heater blower resistor with the 2 screws.


b.

Connect the connector and 2 clamps.


Hide 87212A 7.INSTALL REAR NO. 1 AIR DUCT

a.

Install the rear No. 1 air duct with the 5 screws.