84790 1.INSPECT REAR WINDOW DEFOGGER SWITCH ASSEMBLY
| *a | Component without harness connected (Rear Window Defogger Switch Assembly) |
| *b | Illumination Area |
Check that the rear window defogger switch light illuminates.
Apply battery voltage to the rear window defogger switch assembly and check that the light illuminates.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1 (ILL+) Battery negative (-) → 2 (ILL-) |
Illuminates |
If the result is not as specified, replace the rear window defogger switch assembly.
| *a | Component without harness connected (Rear Window Defogger Switch Assembly) |
| *b | Illumination Area |
Check that the rear window defogger switch light illuminates.
Apply battery voltage to the rear window defogger switch assembly and check that the light illuminates.
| Measurement Condition | Switch Condition | Specified Condition |
|---|---|---|
| Battery positive (+) → 5 (B) Battery negative (-) → 3 (E) |
ON | Illuminates |
| OFF | Non Illuminates |
If the result is not as specified, replace the rear window defogger switch assembly.