Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM25T0E _58 Vehicle Interior _029924 DOOR LOCK _0137601 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84052 1.INSPECT UNLOCK WARNING SWITCH ASSEMBLY

a.
E178151C11
0.125,1.792 2.615,2.24 2.49,0.448 10 false *a 1.292,0.094 2.104,0.344 0.813,0.25 10 false *b 1.302,0.458 1.875,0.688 0.573,0.229 10 false *c
*a Component without harness connected
(Unlock Warning Switch)
*b Not Pushed
*c Pushed


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Not Pushed 10 kΩ or higher
Pushed Below 1 Ω


If the result is not as specified, replace the unlock warning switch assembly.