Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81144 1.REMOVE NO. 1 HEADLIGHT COVER
Remove the No. 1 headlight cover from the headlight unit assembly LH.
81110B 2.REMOVE NO. 1 HEADLIGHT BULB
Push and pull up the set spring to release it.
Remove the No. 1 headlight bulb from the headlight unit assembly LH.
Do not touch the glass part of the No. 1 headlight bulb.
81615D 3.REMOVE CLEARANCE LIGHT SOCKET
| *1 | Matchmark |
| *2 | Unlock Position Mark |
Turn the clearance light socket counterclockwise until the matchmark is aligned with the unlock position mark to remove the clearance light socket from the headlight unit assembly LH.
81610F 4.REMOVE CLEARANCE LIGHT BULB
Remove the clearance light bulb from the clearance light socket.
81515B 5.REMOVE FRONT TURN SIGNAL LIGHT SOCKET
| *1 | Matchmark |
| *2 | Unlock Position Mark |
Turn the front turn signal light socket counterclockwise until the matchmark is aligned with the unlock position mark to remove the front turn signal light socket from the headlight unit assembly LH.
81510C 6.REMOVE FRONT TURN SIGNAL LIGHT BULB
|
Push |
|
Counterclockwise |
Push the front turn signal light bulb in the direction indicated by the white arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the front turn signal light socket.