Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81510C 1.INSTALL FRONT TURN SIGNAL LIGHT BULB
| *1 | Protrusion |
|
Cutout |
Align the 2 protrusions on the front turn signal light bulb with the 2 cutouts of the bulb socket and insert the bulb.
|
Clockwise |
While pushing the front turn signal light bulb, turn the bulb clockwise to install the bulb.
81515B 2.INSTALL FRONT TURN SIGNAL LIGHT SOCKET
| *1 | Matchmark |
| *2 | Unlock Position Mark |
| *3 | Lock Position Mark |
Align the matchmark of the front turn signal light socket to the unlock position mark, and then rotate the front turn signal light socket clockwise until the lock position mark to install the front turn signal light socket to the headlight unit assembly LH.
81610F 3.INSTALL CLEARANCE LIGHT BULB
Install the clearance light bulb to the clearance light socket.
81615D 4.INSTALL CLEARANCE LIGHT SOCKET
| *1 | Matchmark |
| *2 | Unlock Position Mark |
| *3 | Lock Position Mark |
Align the matchmark of the clearance light socket to the unlock position mark, and then rotate the clearance light socket clockwise until the lock position mark to install the clearance light socket to the headlight unit assembly LH.
81110B 5.INSTALL NO. 1 HEADLIGHT BULB
Align the shaded area of the No. 1 headlight bulb shown in the illustration with the shaded area of the headlight unit assembly LH and set the No. 1 headlight bulb onto the headlight unit assembly LH.
Do not touch the glass part of the No. 1 headlight bulb.
Lock the set spring by moving it in the direction indicated by the arrow in the illustration.
81144 6.INSTALL NO. 1 HEADLIGHT COVER
Install the No. 1 headlight cover to the headlight unit assembly LH.