A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
52088 1.INSTALL REAR BUMPER SIDE STAY SUB-ASSEMBLY LH
Install the rear bumper side stay sub-assembly LH with the 2 bolts.
Install the 2 bolts.
52087 2.INSTALL REAR BUMPER SIDE STAY SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
3.INSTALL REAR BUMPER ASSEMBLY
Install the rear bumper assembly with the 4 bolts labeled A and 4 bolts labeled B.
Attach the clamp.
|
Bolt A |
|
Bolt B |