Home › Engine / Hybrid System › 1GR-FE (INTAKE / EXHAUST) › VACUUM SWITCHING VALVE(for ACIS)
RM25T0E _51 Engine / Hybrid System _029771 1GR-FE INTAKE / EXHAUST _0138322 VACUUM SWITCHING VALVE(for ACIS) G

1GR-FE INTAKE / EXHAUST  VACUUM SWITCHING VALVE(for ACIS)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 25860 1.INSPECT VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 33 to 39 Ω
1 - Body ground
2 - Body ground
20°C (68°F) 10 kΩ or higher


If the result is not as specified, replace the vacuum switching valve assembly.


b.

Check operation of the vacuum switching valve assembly.

i.
B002276C03
1.094,1.302 0.75,1 0.75,1 0.583,1 true 2.375,1.083 2.625,1.333 2.625,1.333 2.792,1.333 true 1.427,0.406 1.656,0.563 0.229,0.156 10 false *a 0.396,0.896 0.646,1.052 0.25,0.156 10 false *b 2.833,1.229 3.063,1.396 0.229,0.167 10 false *c
*a Air
*b Port E
*c Filter


Check that air flows from port E to the filter.


ii.
B002277C03
0.948,1.344 1.167,0.917 1.167,0.917 1.25,0.917 true 0.729,1.5 0.396,1.5 true 1.698,0.74 2.083,0.583 2.083,0.583 2.167,0.583 true 1.625,0.719 1.417,0.167 1.417,0.167 1.333,0.167 true 1.271,0.479 1.521,0.646 0.25,0.167 10 false *a 1.271,0.813 1.521,0.979 0.25,0.167 10 false *b 0.219,1.396 0.469,1.552 0.25,0.156 10 false *c 2.198,0.49 2.354,0.688 0.156,0.198 10 false 1 1.219,0.063 1.375,0.26 0.156,0.198 10 false 2
*a Air
*b Port E
*c Port F


Apply battery voltage across terminals 1 and 2.


iii.

Check that air flows from port E to port F.

If the result is not as specified, replace the vacuum switching valve assembly.