Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › IMMOBILISER SYSTEM › 2014.08–2017.09
RM25T0E _58 Vehicle Interior _029925 THEFT DETERRENT / KEYLESS ENTRY _0138323 IMMOBILISER SYSTEM D

THEFT DETERRENT / KEYLESS ENTRY  IMMOBILISER SYSTEM  SYSTEM DESCRIPTION  


IMMOBILISER SYSTEM DESCRIPTION


The immobiliser system is designed to prevent the vehicle from being stolen. This system uses a transponder key ECU assembly that stores the key codes of authorized ignition keys. If an attempt is made to start the engine using an unauthorized key, the ECU sends a signal to the ECM to prohibit fuel delivery and ignition, effectively disabling the engine.


FUNCTION OF MAIN COMPONENTS


Component Outline
Transponder key ECU assembly
·

When a key is inserted into the ignition key cylinder, the transponder key ECU assembly checks if the key ID code received from the transponder key coil and registered key ID code match.

·

When the engine is started, the transponder key ECU assembly checks if the engine ID codes stored in the ECM and transponder key ECU assembly match.


Transponder key amplifier When key is inserted into ignition key cylinder, antenna coil receives key code. Then amplifier amplifies ID code and outputs it to transponder key ECU assembly.
ECM The ECM receives key ID code verification results from the transponder key ECU assembly. The ECM also verifies the ECUs. Then judgment of whether to immobilize the engine is made.
Unlock warning switch assembly Detects whether key is in ignition key cylinder and outputs results to transponder key ECU assembly.


SYSTEM FUNCTION


a.

When the transponder key ECU assembly detects that the unlock warning switch assembly is on, the transponder key ECU assembly applies current to the transponder key coil and produces a magnetic field around the antenna coil. A transponder chip in the key grip outputs a key ID code signal using electromotive force generated by the magnetic field.

The transponder key coil receives the signal and sends it to the transponder key ECU assembly. The transponder key ECU assembly checks if the key ID code received from the transponder key coil matches the registered key ID code.

When the engine is started, the ECM communicates with the transponder key ECU assembly and checks the key verification result. In addition, the ECM checks if the engine ID codes stored in the transponder key ECU assembly and ECM match. If they do not match, the ECM prohibits engine start.