Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT BULB
RM25T0E _59 Vehicle Exterior _029940 LIGHTING (EXT) _0138177 HEADLIGHT BULB A

LIGHTING (EXT)  HEADLIGHT BULB  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81144 1.REMOVE NO. 1 HEADLIGHT COVER

a.
E298631

for LH Side:

i.

Detach the wire harness clamp.


ii.

Remove the bolt, nut and No. 3 battery tray support.



b.

Disconnect the connector.


c.
E147709

Remove the No. 1 headlight cover from the headlight unit assembly LH.


Hide 81110B 2.REMOVE NO. 1 HEADLIGHT BULB

a.
E296806

Push and pull up the set spring to release it.


b.
E147712

Remove the No. 1 headlight bulb from the headlight unit assembly LH.

NOTICE:

Do not touch the glass part of the No. 1 headlight bulb.



Hide 81110B 3.INSTALL NO. 1 HEADLIGHT BULB

a.
E296813

Align the shaded area of the No. 1 headlight bulb shown in the illustration with the shaded area of the headlight unit assembly LH and set the No. 1 headlight bulb onto the headlight unit assembly LH.

NOTICE:

Do not touch the glass part of the No. 1 headlight bulb.



b.
E296807

Lock the set spring by moving it in the direction indicated by the arrow in the illustration.


Hide 81144 4.INSTALL NO. 1 HEADLIGHT COVER

E147709

a.

Install the No. 1 headlight cover to the headlight unit assembly LH.


b.

Connect the connector.


c.
E298631

for LH Side:

i.

Install the No. 3 battery tray support with the bolt and nut.

Torque:
for Bolt : 12.5 N*m (127 kgf*cm, 9 ft.*lbf)
for Nut : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


ii.

Attach the wire harness clamp.