Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81484A 1.REMOVE FOG LIGHT PROTECTOR LH
for Standard:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Standard)>REMOVAL
for Step Type:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Step Type)>REMOVAL
81210B 2.REMOVE FOG LIGHT BULB
Turn the fog light bulb in the direction indicated by the arrow in the illustration and remove it.
81210B 3.INSTALL FOG LIGHT BULB
| *1 | Matchmark |
| *2 | Cutout |
| *3 | Lock Position Mark |
Align the matchmark of the fog light bulb to the cutout, and then rotate the fog light bulb clockwise until the lock position mark to install the fog light bulb.
81484A 4.INSTALL FOG LIGHT PROTECTOR LH
for Standard:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Standard)>INSTALLATION
for Step Type:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER (for Step Type)>INSTALLATION
5.INSPECT FOG LIGHT AIMING