87940 1.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
Check the operation of the mirror surface.
| *a | Component without harness connected (Outer Rear View Mirror Assembly LH) |
Disconnect the outer rear view mirror assembly LH connector.
Apply battery voltage and check the operation of the mirror.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2 (MV) Battery negative (-) → Terminal 3 (M+) |
Turns upward |
| Battery positive (+) → Terminal 3 (M+) Battery negative (-) → Terminal 2 (MV) |
Turns downward |
| Battery positive (+) → Terminal 1 (MH) Battery negative (-) → Terminal 3 (M+) |
Turns right |
| Battery positive (+) → Terminal 3 (M+) Battery negative (-) → Terminal 1 (MH) |
Turns left |
If the result is not as specified, replace the outer rear view mirror assembly LH.
87910 2.INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
Check the operation of the mirror surface.
| *a | Component without harness connected (Outer Rear View Mirror Assembly RH) |
Disconnect the outer rear view mirror assembly RH connector.
Apply battery voltage and check the operation of the mirror.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2 (MV) Battery negative (-) → Terminal 3 (M+) |
Turns upward |
| Battery positive (+) → Terminal 3 (M+) Battery negative (-) → Terminal 2 (MV) |
Turns downward |
| Battery positive (+) → Terminal 1 (MH) Battery negative (-) → Terminal 3 (M+) |
Turns left |
| Battery positive (+) → Terminal 3 (M+) Battery negative (-) → Terminal 1 (MH) |
Turns right |
If the result is not as specified, replace the outer rear view mirror assembly RH.