Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81560 1.REMOVE REAR COMBINATION LIGHT ASSEMBLY LH
Remove the 4 screws and rear combination light assembly LH.
Disconnect the connector.
2.REMOVE SCREW GROMMET
Detach the 2 claws and remove the screw grommet.
Use the same procedure to remove the screw grommet on the other side.
81620D 3.REMOVE REAR COMBINATION LIGHT COVER LH (except Deckless)
Remove the 4 bolts and rear combination light cover LH.
81563 4.REMOVE REAR NO. 1 COMBINATION LIGHT BRACKET LH (for Deckless)
Remove the bolt and rear No. 1 combination light bracket LH.