Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81562 1.INSTALL REAR COMBINATION LIGHT LENS GASKET LH
| *1 | Notch |
Install a new rear combination light lens gasket LH to the rear combination light body.
Position the notch of the rear combination light lens gasket LH at the lower center of the rear combination light body.
81550D 2.INSTALL REAR COMBINATION LIGHT BULB (for Backup Light)
| *1 | Protrusion |
|
Cutout |
Align the 2 protrusions on the rear combination light bulb with the 2 cutouts of the rear combination light body and insert the bulb to the rear combination light body.
|
Push |
|
Clockwise |
While pushing the rear combination light bulb, turn the bulb clockwise to install the bulb.
81550B 3.INSTALL REAR COMBINATION LIGHT BULB (for Tail and Stop Light)
| *1 | Upper Protrusion |
| *2 | Lower Protrusion |
|
Long Cutout |
|
Short Cutout |
Align the upper protrusion of the rear combination light bulb with the short cutout of the rear combination light body and the lower protrusion with the long cutout, and then insert the bulb to the rear combination light body.
|
Push |
|
Clockwise |
While pushing the rear combination light bulb, turn the bulb clockwise to install the bulb.
81550D 4.INSTALL REAR COMBINATION LIGHT BULB (for Rear Turn Signal Light)
| *1 | Protrusion |
|
Cutout |
Align the 2 protrusions on the rear combination light bulb with the 2 cutouts of the rear combination light body and insert the bulb to the rear combination light body.
|
Push |
|
Clockwise |
While pushing the rear combination light bulb, turn the bulb clockwise to install the bulb.
81563C 5.INSTALL REAR COMBINATION LIGHT LENS LH
Install the rear combination light lens LH to the rear combination light body.