Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY(for Pickup)
RM25T0E _59 Vehicle Exterior _029940 LIGHTING (EXT) _0138192 REAR COMBINATION LIGHT ASSEMBLY(for Pickup) A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY(for Pickup)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

A bolt without a torque specification is shown in the standard bolt chart.



PROCEDURE

Hide 81563 1.INSTALL REAR NO. 1 COMBINATION LIGHT BRACKET LH (for Deckless)

a.

Install the rear No. 1 combination light bracket LH with the bolt.


Hide 81620D 2.INSTALL REAR COMBINATION LIGHT COVER LH (except Deckless)

a.

Install the rear combination light cover LH with the 4 bolts.


Hide 3.INSTALL SCREW GROMMET

a.

Attach the 2 claws to install a new screw grommet.

HINT:

Use the same procedure to install the screw grommet on the other side.



Hide 81560 4.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

a.

Connect the connector.


b.

Install the rear combination light assembly LH with the 4 screws.