Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP(for 1VD-FTV)
RM25T0E _54 Brake _029916 BRAKE SYSTEM (OTHER) _0138396 VACUUM PUMP(for 1VD-FTV) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 1VD-FTV)  INSTALLATION  


PROCEDURE

Hide 29300 1.INSTALL VACUUM PUMP ASSEMBLY

a.
C160668

Apply engine oil to the 2 O-rings.


b.
C160890N01
1.188,0.99 1.344,1.188 0.156,0.198 10 false B 1.802,1.417 1.958,1.615 0.156,0.198 10 false A 1.75,0.667 1.906,0.865 0.156,0.198 10 false A

Install the vacuum pump so that the coupling teeth of the vacuum pump A and the groove of the camshaft B are aligned.

NOTICE:

Be careful not to damage the O-ring.



c.

Install the vacuum pump assembly with the 3 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

NOTICE:

Confirm that the vacuum pump is not at an angle, and that there is no clearance between the fitting surfaces.



Hide 44774 2.CONNECT UNION TO CONNECTOR TUBE HOSE

a.

Connect the vacuum hose and slide the clamp to secure it.


Hide 29300 3.INSPECT VACUUM PUMP OPERATION