Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY
RM25T0E _52 Drivetrain _029905 DRIVE SHAFT / PROPELLER SHAFT _0138401 FRONT PROPELLER SHAFT ASSEMBLY A

DRIVE SHAFT / PROPELLER SHAFT  FRONT PROPELLER SHAFT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 37140 1.INSTALL FRONT PROPELLER SHAFT ASSEMBLY

a.

Completely remove any oil or the like and clean the contact surfaces of the 2 propeller shaft flanges, differential flange and transfer flange.


b.
C113727C01
1.438,1.188 2.188,1.604 2.188,1.604 1.552,1.146 false 2.24,1.542 2.552,1.74 0.313,0.198 10 false *a
*a Matchmark


Align the matchmarks on the propeller shaft flange and differential flange.


c.

Install the front propeller shaft assembly with the 4 nuts, 4 bolts and 4 washers.

Torque:
73.5 N*m (749 kgf*cm, 54 ft.*lbf)


d.
C113726C01
1.802,1.302 0.802,1.615 0.802,1.615 1.896,1.354 true 0.635,1.542 0.948,1.74 0.313,0.198 10 false *a
*a Matchmark


Align the matchmarks on the propeller shaft flange and transfer flange.


e.

Install the front propeller shaft assembly with the 4 washers and 4 nuts.

Torque:
73.5 N*m (749 kgf*cm, 54 ft.*lbf)