Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY
RM25T0E _52 Drivetrain _029905 DRIVE SHAFT / PROPELLER SHAFT _0138402 PROPELLER SHAFT ASSEMBLY A

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 37110 1.INSTALL PROPELLER SHAFT ASSEMBLY

a.

Completely remove any oil or the like and clean the contact surfaces of the 2 propeller shaft flanges, differential flange and transfer flange.


b.
C307740C01
1.927,1.24 2.656,1.375 2.656,1.375 2,1.177 true 2.688,1.302 3,1.5 0.313,0.198 10 false *a
*a Matchmark


Align the matchmarks on the propeller shaft flange and transfer flange.


c.

Install the propeller shaft assembly with the 4 washers and 4 nuts.

Torque:
88.2 N*m (899 kgf*cm, 65 ft.*lbf)


d.
C164369C01
1.583,1.281 0.875,1.74 0.875,1.74 1.51,1.208 false 0.719,1.667 1.031,1.865 0.313,0.198 10 false *a
*a Matchmark


Align the matchmarks on the propeller shaft flange and differential flange.


e.

Install the propeller shaft assembly with the 4 bolts, 4 washers and 4 nuts.

Torque:
88.2 N*m (899 kgf*cm, 65 ft.*lbf)