Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY
RM25T0E _52 Drivetrain _029905 DRIVE SHAFT / PROPELLER SHAFT _0138402 PROPELLER SHAFT ASSEMBLY G

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY  INSPECTION  


CAUTION / NOTICE / HINT

NOTICE:
·

When using a vise, place aluminum plates between the part and vise.

·

When using a vise, do not overtighten it.



PROCEDURE

Hide 37110 1.INSPECT PROPELLER SHAFT ASSEMBLY

a.
C258371

Using a dial indicator, check the propeller shaft assembly runout.

Maximum runout:

0.8 mm (0.0315 in.)


If the propeller shaft assembly runout is more than the maximum, replace the propeller shaft assembly.


Hide 2.INSPECT SPIDER BEARING

a.

Check the spider bearings for wear or damage.

If necessary, replace the spider bearing.


b.
C175289

Check the spider bearing axial play by turning the yoke with holding the propeller shaft assembly tightly.

Maximum bearing axial play:

0.05 mm (0.00197 in.)


If the axial play is more than the maximum, replace the spider bearing.