Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › 2014.08–2016.08
RM25T0E _58 Vehicle Interior _029924 DOOR LOCK _0138406 POWER DOOR LOCK CONTROL SYSTEM U

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  TERMINALS OF ECU  


CHECK DOOR CONTROL RELAY ASSEMBLY (w/o Wireless Door Lock Control System)


a.
B298649C01
1.042,0.229 1.542,0.49 0.5,0.26 1.854,0.229 2.354,0.49 0.5,0.26 1.208,0.281 1.667,0.479 0.458,0.198 10 false P7 1.583,0.271 1.854,0.49 0.271,0.219 10 false *A 2,0.281 2.458,0.479 0.458,0.198 10 false O6 2.396,0.271 2.667,0.49 0.271,0.219 10 false *B
*A for LHD
*B for RHD


Disconnect the P7*1 or O6*2 door control relay assembly connector.

*1: for LHD

*2: for RHD



b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
P7-4 (B) - Body ground*1 L-R - Body ground Battery power supply Always 11 to 14 V
O6-4 (B) - Body ground*2 L-R - Body ground Battery power supply Always 11 to 14 V
P7-8 (E) - Body ground*1 W-B - Body ground Ground Always Below 1 Ω
O6-8 (E) - Body ground*2 W-B - Body ground Ground Always Below 1 Ω

*1: for LHD

*2: for RHD



c.

Reconnect the P7*1 or O6*2 door control relay assembly connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
P7-1 (ACT+) - Body ground*1 B - Body ground Door lock motor lock drive output Power window regulator master switch assembly*1, door control switch assembly*2 or door key cylinder off → on (lock) Below 1 V → 11 to 14 V → Below 1 V
O6-1 (ACT+) - Body ground*2 B - Body ground Door lock motor lock drive output Power window regulator master switch assembly*1, door control switch assembly*2 or door key cylinder off → on (lock) Below 1 V → 11 to 14 V → Below 1 V
P7-3 (ACT-) - Body ground*1 W - Body ground Door lock motor unlock drive output Power window regulator master switch assembly*1, door control switch assembly*2 or door key cylinder off → on (unlock) Below 1 V → 11 to 14 V → Below 1 V
O6-3 (ACT-) - Body ground*2 W - Body ground Door lock motor unlock drive output Power window regulator master switch assembly*1, door control switch assembly*2 or door key cylinder off → on (unlock) Below 1 V → 11 to 14 V → Below 1 V
P7-6 (L1) - Body ground*1 G-R - Body ground Power window regulator master switch assembly*1, door control switch assembly*2 or door key-linked lock input
·

Door key cylinder turned to neutral position → on (lock)

·

Power window regulator master switch assembly*1 or door control switch assembly*2 off → on (lock)


11 to 14 V → Below 1 V
O6-6 (L1) - Body ground*2 G-R - Body ground Power window regulator master switch assembly*1, door control switch assembly*2 or door key-linked lock input
·

Door key cylinder turned to neutral position → on (lock)

·

Power window regulator master switch assembly*1 or door control switch assembly*2 off → on (lock)


11 to 14 V → Below 1 V
P7-7 (UL1) - Body ground*1 R-W - Body ground Power window regulator master switch assembly*1, door control switch assembly*2 or door key-linked unlock input
·

Door key cylinder turned to neutral position → on (unlock)

·

Power window regulator master switch assembly*1 or door control switch assembly*2 off → on (unlock)


11 to 14 V → Below 1 V
O6-7 (UL1) - Body ground*2 R-W - Body ground Power window regulator master switch assembly*1, door control switch assembly*2 or door key-linked unlock input
·

Door key cylinder turned to neutral position → on (unlock)

·

Power window regulator master switch assembly*1 or door control switch assembly*2 off → on (unlock)


11 to 14 V → Below 1 V

*1: w/ Power Window Control System

*2: w/o Power Window Control System




CHECK DOOR CONTROL WITH RECEIVER ECU ASSEMBLY (w/ Wireless Door Lock Control System)


a.
B267664N02
1.49,0.125 1.99,0.375 0.5,0.25 1.625,0.167 1.938,0.344 0.313,0.177 10 false L31

Disconnect the L31 door control with receiver ECU assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L31-1 (ALTB) - Body ground L-R - Body ground Battery power supply Always 11 to 14 V
L31-2 (B) - Body ground R - Body ground Battery power supply Always 11 to 14 V
L31-11 (E) - Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Reconnect the L31 door control with receiver ECU assembly connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L31-6 (UL1) - Body ground R-W - Body ground Power window regulator master switch assembly*1, door control switch assembly*2 or door key-linked unlock input
·

Door key cylinder turned to neutral position → on (unlock)

·

Power window regulator master switch assembly*1 or door control switch assembly*2 off → on (unlock)


11 to 14 V → Below 1 V
L31-7 (L1) - Body ground G-R - Body ground Power window regulator master switch assembly*1, door control switch assembly*2 or door key-linked lock input
·

Door key cylinder turned to neutral position → on (lock)

·

Power window regulator master switch assembly*1 or door control switch assembly*2 off → on (lock)


11 to 14 V → Below 1 V
L31-10 (ACT-) - Body ground W - Body ground Door lock motor unlock drive output Power window regulator master switch assembly*1, door control switch assembly*2 or door key cylinder off → on (unlock) Below 1 V → 11 to 14 V → Below 1 V
L31-16 (LSWD) - Body ground P - Body ground Door unlock detection switch input Driver side door unlock Below 1 V
Driver side door lock 11 to 14 V
L31-20 (ACT+) - Body ground B-R - Body ground Door lock motor lock drive output Power window regulator master switch assembly*1, door control switch assembly*2 or door key cylinder off → on (lock) Below 1 V → 11 to 14 V → Below 1 V

*1: w/ Power Window Control System

*2: w/o Power Window Control System