Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM
RM25T0E _58 Vehicle Interior _029924 DOOR LOCK _0138407 WIRELESS DOOR LOCK CONTROL SYSTEM D

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM  OPERATION CHECK  


NOTICE WHEN CHECKING


a.

Wireless door lock/unlock function:

The wireless door lock control function operates only when the following conditions are met:

·

The ignition switch is off.

·

All the doors are closed.

HINT:

The unlock function operates even when one of the doors is open.


·

The power door lock system is functioning normally.



b.

The operational range of the door control transmitter differs depending on the situation.

·

The operational range differs depending on the user, the way the door control transmitter is held and the location.

·

In certain areas, the operational range will be reduced due to the vehicle body shape and the influence of the surrounding environment.

·

The weak electric waves from the door control transmitter may be affected if the area has strong electric waves or noise. The operational range of the door control transmitter may be reduced or the door control transmitter may not function.

·

When the transmitter battery weakens, the operational range is reduced and the door control transmitter may not function.

HINT:

The transmitter battery may weaken or other problems may occur if one of the following occurs: 1) the door control transmitter has had prolonged exposure to direct sunlight, such as on the instrument panel; or 2) the door control transmitter is placed within 1 m (3.28 ft.) of electrical products, such as TVs, computers, cordless phones, cell phone recharger stands (with the cell phone recharging), etc.





CHECK WIRELESS DOOR LOCK CONTROL FUNCTION


HINT:
·

The switches described below transmit signals and are built into the door control transmitter.

·

The operational range of the door control transmitter must be taken into account while checks are being made.



a.

Make sure the vehicle is in a condition in which the wireless control functions can be operated (see above).


b.

Check the basic functions:

·

Check that all the doors lock when the lock switch is pressed.

·

Check that all the doors unlock when the unlock switch is pressed.



c.

Check the answer-back function:

·

When the lock switch is pressed, check that the hazard warning lights flash once simultaneously with the locking operation of all the doors.

·

When the unlock switch is pressed once, check that the hazard warning lights flash twice simultaneously with the unlocking operation of all the doors.



d.

Check the automatic locking function:

When all the doors are unlocked with the unlock switch, check that the doors lock again after 30 seconds when none of the following conditions are met.

·

None of the doors are opened.

·

The door control transmitter is not operated.

·

The driver side door lock knob is not operated.