Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM
RM25T0E _58 Vehicle Interior _029924 DOOR LOCK _0138407 WIRELESS DOOR LOCK CONTROL SYSTEM M

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM  REGISTRATION  


PROCEDURE

Hide 1. DESCRIPTION OF CODE REGISTRATION

HINT:
·

Recognition code registration is necessary when replacing the door control transmitter or door control with receiver ECU assembly.

·

Add mode is used to register new recognition codes while still retaining codes already registered. This mode is used when a new door control transmitter is added. If the number of registered codes exceeds 4, the previously registered codes will be cleared in order, starting from the first registered code.

·

Rewrite mode is used to clear all the previously registered recognition codes in order to register new recognition codes. This mode is used when the door control transmitter or door control with receiver ECU assembly is replaced with a new one.

·

Confirmation mode is used to confirm how many recognition codes have already been registered before another recognition code is registered.

·

Clear mode is used to clear all the registered codes and disable the wireless door lock function. This mode is used when the door control transmitter is lost.

·

The registration procedures must be performed in order.



Hide 2. REGISTER RECOGNITION CODE

a.

Make sure the following conditions are met.

·

The ignition switch is off.

·

The driver side door is open (the other doors are closed).



b.

Perform the following operation:

i.

Turn the ignition switch to ON and then off (off → ON → off).

HINT:

The procedure should end with the ignition switch off.




c.

Perform the following operations within 40 seconds:

i.

Close and open the driver side door twice (Close → Open → Close → Open).


ii.

Turn the ignition switch to ON and then off (off → ON → off).

HINT:
·

The procedure should end with the driver side door open and the ignition switch off.

·

If even one of the following conditions is satisfied, registration mode is canceled.

-

These procedures are not completed within 40 seconds.

-

The ignition switch is turned to ON before the driver side door is operated.

-

The door control with receiver ECU assembly receives a valid RF signal during this procedure (door control transmitter switch is pressed).






d.

Perform the following operations within 40 seconds:

i.

Close and open the driver side door twice (Close → Open → Close → Open).


ii.

Close the driver side door and lock it.

HINT:
·

The procedure should end with the driver side door closed (locked) and the ignition switch off.

·

If even one of the following conditions is satisfied, registration mode is canceled.

-

These procedures are not completed within 40 seconds.

-

The ignition switch is turned to ON.

-

The door control with receiver ECU assembly receives a valid RF signal during this procedure (door control transmitter switch is pressed).






e.

Perform the following operations within 40 seconds:

i.

Operate the ignition switch the number of times shown below.

B111914E34
0.229,0.781 0.896,0.958 0.667,0.177 10 false Add Mode 0.083,0.083 3.115,0.271 3.031,0.188 10 false Number of ON-off operations of ignition switch: 1.51,0.781 3.094,1 1.583,0.219 10 false ON-off operation: Once 0.563,1.583 0.875,1.76 0.313,0.177 10 false ON 0.573,1.917 0.802,2.125 0.229,0.208 10 false Off 1.292,1.271 1.479,1.448 0.188,0.177 10 false T1 3.74,0.781 4.635,0.958 0.896,0.177 10 false Rewrite Mode 5.021,0.781 6.635,1 1.615,0.219 10 false ON-off operation: Twice 4.052,1.583 4.375,1.76 0.323,0.177 10 false ON 4.073,1.917 4.292,2.125 0.219,0.208 10 false Off 4.792,1.271 4.979,1.448 0.188,0.177 10 false T1 5,1.271 5.188,1.448 0.188,0.177 10 false T1 0.229,2.802 1.427,2.979 1.198,0.177 10 false Confirmation Mode 1.5,2.823 3.208,3.042 1.708,0.219 10 false ON-off operation: 3 times 0.552,3.635 0.854,3.813 0.302,0.177 10 false ON 0.573,3.958 0.813,4.167 0.24,0.208 10 false Off 4.771,3.271 4.958,3.448 0.188,0.177 10 false T1 4.99,3.271 5.177,3.448 0.188,0.177 10 false T1 1.26,3.281 1.448,3.458 0.188,0.177 10 false T1 1.469,3.281 1.656,3.458 0.188,0.177 10 false T1 3.74,2.802 4.938,2.979 1.198,0.177 10 false Clear Mode 4.979,2.792 7.146,3.01 2.167,0.219 10 false ON-off operation: 5 times 4.063,3.615 4.375,3.802 0.313,0.188 10 false ON 4.073,3.938 4.281,4.146 0.208,0.208 10 false Off 3.781,4.333 5.844,4.531 2.063,0.198 10 false T1: Approximately 1 second


ii.

Unlock the driver side door.

HINT:

If even one of the following conditions is satisfied, registration mode is canceled.

·

These procedures are not completed within 40 seconds.

·

The number of ignition switch ON-off operations is 0, 4 or 6 or more.





f.

Check that the response begins within 5 seconds after completing the above step, and that the response matches the selected mode.

B111913E29
0.229,1.427 0.896,1.604 0.667,0.177 10 false Add Mode 1.5,1.406 3.552,1.625 2.052,0.219 10 false Lock-unlock operation: Once 0.479,2.219 0.823,2.396 0.344,0.177 10 false Lock 0.344,2.542 0.802,2.75 0.458,0.208 10 false Unlock 1.292,1.927 1.479,2.104 0.188,0.177 10 false T1 3.74,1.427 4.635,1.604 0.896,0.177 10 false Rewrite Mode 5.021,1.406 7.125,1.625 2.104,0.219 10 false Lock-unlock operation: Twice 4,2.219 4.323,2.396 0.323,0.177 10 false Lock 3.854,2.542 4.323,2.75 0.469,0.208 10 false Unlock 4.802,1.896 4.99,2.073 0.188,0.177 10 false T1 5,1.896 5.188,2.073 0.188,0.177 10 false T1 0.083,0.073 3.625,0.26 3.542,0.188 10 false Response to selected mode (power door lock operation): 0.083,0.49 6.823,0.875 6.74,0.385 10 false The door control with receiver ECU assembly automatically performs power door lock-unlock operations to indicate which mode has been selected. 0.229,3.448 1.427,3.625 1.198,0.177 10 false Confirmation Mode 1.5,3.427 6.781,3.646 5.281,0.219 10 false Lock-unlock operation: The number of registered codes (1 to 4 times or 5 times) 0.479,4.542 0.823,4.719 0.344,0.177 10 false Lock 0.344,4.875 0.802,5.083 0.458,0.208 10 false Unlock 1.375,4.25 1.563,4.427 0.188,0.177 10 false T2 1.771,4.25 1.958,4.427 0.188,0.177 10 false T2 1.26,6.333 1.448,6.51 0.188,0.177 10 false T1 1.469,6.333 1.656,6.51 0.188,0.177 10 false T1 1.406,3.792 1.969,3.99 0.563,0.198 10 false 1st Time 2.188,3.792 2.792,3.99 0.604,0.198 10 false 2nd Time 0.229,5.781 1.427,5.958 1.198,0.177 10 false Clear Mode 1.5,5.729 3.667,5.948 2.167,0.219 10 false Lock-unlock operation: 5 times 0.479,6.615 0.823,6.792 0.344,0.177 10 false Lock 0.344,6.948 0.802,7.156 0.458,0.208 10 false Unlock 5.104,5.813 7.125,6.083 2.021,0.271 10 false T1: Approximately 1 second 5.115,6.188 7.156,6.396 2.042,0.208 10 false T2: Approximately 2 seconds

HINT:
·

If even one of the following conditions is satisfied, registration mode is canceled.

-

These procedures are not completed within 40 seconds.

-

The number of ignition switch ON-off operations is 0, 4 or 6 or more.


·

In confirmation mode, a lock-unlock operation will occur once for each recognition code that has been registered. For example, if 2 recognition codes have been registered, the lock-unlock operation will occur 2 times.

·

In confirmation mode, if no recognition codes have been registered, the lock-unlock operation will occur 5 times.

·

If confirmation mode or clear mode is selected, the operation ends after the response to the selected mode completes.




g.

Perform the following operations within 40 seconds:

i.

Press the lock and unlock switches on the transmitter simultaneously.


ii.

After completing the above step, press a switch (lock or unlock).



h.

After completing the above step, check the response to registration.

B111915E57
0.229,1.396 2.115,1.573 1.885,0.177 10 false Lock-unlock Occurs Once 4.115,1.396 6.031,1.573 1.917,0.177 10 false Lock-unlock Occurs Twice 0.438,2.792 0.771,2.969 0.333,0.177 10 false Lock 0.313,3.115 0.771,3.323 0.458,0.208 10 false Unlock 1.292,2.5 1.479,2.677 0.188,0.177 10 false T1 4.344,2.792 4.656,2.969 0.313,0.177 10 false Lock 4.188,3.115 4.646,3.323 0.458,0.208 10 false Unlock 5.167,2.469 5.354,2.646 0.188,0.177 10 false T1 5.375,2.469 5.563,2.646 0.188,0.177 10 false T1 0.083,0.104 2.385,0.292 2.302,0.188 10 false Response to registration: 3.552,3.417 5.781,3.594 2.229,0.177 10 false T1: Approximately 1 second 0.208,0.615 6.938,1 6.729,0.385 10 false The door control with receiver ECU assembly automatically performs power door lock-unlock operations to show whether registration has been completed correctly or not. 0.188,1.927 2.438,2.333 2.25,0.406 10 false Registration of the recognition code has been completed. 4.073,1.927 6.323,2.333 2.25,0.406 10 false Registration of the recognition code has failed.

HINT:
·

If the registration of the recognition code has failed, perform the registration procedures again from the beginning.

·

If registering another transmitter, repeat the procedures after the mode selection response confirmation. All 4 recognition codes can be registered consecutively.




i.

Perform either of the following:

i.

Open the door.


ii.

Turn the ignition switch to ON.



j.

Registration of the recognition codes (add mode and rewrite mode) is completed.