Home › Vehicle Interior › DOOR LOCK › KEY REMINDER WARNING SYSTEM › 2014.08–2016.08
RM25T0E _58 Vehicle Interior _029924 DOOR LOCK _0138408 KEY REMINDER WARNING SYSTEM U

DOOR LOCK  KEY REMINDER WARNING SYSTEM  TERMINALS OF ECU  


CHECK COMBINATION METER ASSEMBLY


E192526N01
1.938,0.333 2.438,0.583 0.5,0.25 4.896,0.333 5.396,0.583 0.5,0.25 2.083,0.375 2.542,0.573 0.458,0.198 10 false L26 5.021,0.375 5.479,0.573 0.458,0.198 10 false L25

a.

Disconnect the L25 combination meter assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L25-15 (ES) - Body ground BR - Body ground Ground Always Below 1 Ω
L25-26 (B) - Body ground R - Body ground Battery power supply Always 11 to 14 V
L25-28 (B) - Body ground B-Y - Body ground IG power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V


c.

Reconnect the L25 combination meter assembly connector.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L25-6 (DOOR) - Body ground B-W - Body ground Driver side door input signal Driver side door closed Below 1 V
Driver side door open 11 to 14 V
L25-19 (SW) - Body ground B-R - Body ground Unlock warning switch input signal No key in ignition key cylinder 11 to 14 V
Ignition switch off, key in ignition key cylinder Below 1 V