Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM › 2014.08–2016.08
RM25T0E _58 Vehicle Interior _029931 SEAT BELT _0138409 SEAT BELT WARNING SYSTEM D

SEAT BELT  SEAT BELT WARNING SYSTEM  SYSTEM DESCRIPTION  


SEAT BELT WARNING SYSTEM DESCRIPTION


a.

Front seat belt warning light operation for driver side seat belt:

The front seat belt warning light on the combination meter assembly blinks or turns off in accordance with the driver side seat belt state or vehicle speed.


b.

Seat belt warning buzzer (except 1VD-FTV):

The seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds 5 times, when the ignition switch is turned to ON while the driver side seat belt is not fastened.

The seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 9.6 seconds, and then the buzzer sounds at an interval of 0.4 seconds for 20 seconds when the vehicle is driven at approximately 20 km/h (12 mph) or more while the driver side seat belt is unfastened.


c.

Seat belt warning buzzer (for 1VD-FTV):

The seat belt warning buzzer in the combination meter assembly sounds at an interval of 1.2 seconds for 30 seconds, and then the buzzer sounds at an interval of 0.4 seconds for 90 seconds when the vehicle is driven at approximately 20 km/h (12 mph) or more while the driver side seat belt is unfastened.



FUNCTION OF MAIN COMPONENT


The following functions are available.
Components Function
Front seat inner belt assembly LH*1
Front seat inner belt assembly RH*2
Informs combination meter assembly of driver side seat belt condition (fastened or unfastened).
Front seat belt warning light If driver side seat belt is unfastened and ignition switch is ON, combination meter assembly flashes front seat belt warning light in combination meter assembly as reminder.
Combination meter assembly (seat belt warning buzzer) If vehicle is driven at approximately 20 km/h (12 mph) or more while the driver side seat belt is unfastened, the seat belt warning buzzer in combination meter assembly sounds as reminder.

*1: for LHD

*2: for RHD