Use the same procedure for the RH and LH sides
The procedure listed below is for the LH side.
68176A 1.INSTALL DOOR VENT WINDOW GLASS WEATHERSTRIP LH
Install the door vent window glass weatherstrip LH to the front door division bar sub-assembly LH as shown in the illustration.
68182A 2.INSTALL DOOR VENT WINDOW WEATHERSTRIP LH
Install door vent window glass weatherstrip LH to the vent window glass LH at the locations shown in the illustration.
| Area | Specified Condition |
|---|---|
| a | 14.4 mm (0.5669 in.) |
67502 3.INSTALL VENT WINDOW GLASS FRAME SUB-ASSEMBLY LH
Install vent window glass frame sub-assembly LH to the vent window glass LH.
67508 4.INSTALL UPPER VENT WINDOW PIVOT SUB-ASSEMBLY LH
Install the upper vent window pivot plate, retainer, upper vent window pivot sub-assembly LH and 2 gaskets.
Install the screw.
68122 5.INSTALL VENT WINDOW GLASS LH
| *1 | Nut |
| *2 | Vent Window Glass Frame Lock Washer |
| *3 | Washer |
| *4 | Spring |
| *5 | Front Door Ventilating Window Lower Pivot Washer |
| *6 | Front Door Bent Window Opening Stopper |
Install the vent window glass LH to the front door division bar sub-assembly LH with the 2 screws.
Install the vent window glass frame lock washer, washer, spring, front door ventilating window lower pivot washer, washer.
Install a new front door vent window opening stopper.
Install the nut.
67534E 6.INSTALL FRONT DOOR DIVISION BAR SEAL LH
Install the front door division bar seal LH.