Home › Brake › BRAKE (FRONT) › FRONT DISC BRAKE PAD › 2014.08–2016.08
RM25T0E _54 Brake _029917 BRAKE (FRONT) _0138482 FRONT DISC BRAKE PAD A

BRAKE (FRONT)  FRONT DISC BRAKE PAD  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



NOTICE:

After replacing the disc brake pads, the clearance between the disc brake pads and front discs becomes larger and the brake pedal feel becomes softer. Therefore, after replacing the disc brake pads, depress the brake pedal several times and check the clearance and brake pedal feel.


PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 2.DRAIN BRAKE FLUID

NOTICE:

Wash off brake fluid immediately if it comes in contact with any painted surface.


Hide 04465 3.REMOVE FRONT DISC BRAKE PAD

a.
C310910C02
1.552,1.094 1.125,1.438 1.125,1.438 0.948,1.438 true 1.198,1.042 1.073,0.552 1.073,0.552 0.875,0.552 true 1.188,1.875 1.083,2 1.083,2 0.875,2 true 1.99,1.448 2.396,1.917 2.396,1.917 2.573,1.917 false 0.688,0.5 0.896,0.677 0.208,0.177 10 true *1 2.604,1.844 2.813,2.042 0.208,0.198 10 true *2 0.792,1.365 1,1.552 0.208,0.188 10 true *3 0.708,1.927 0.917,2.104 0.208,0.177 10 true *1
*1 Disc Brake Pad Guide Pin
*2 Pin Hold Clip
*3 Front Disc Brake Anti-rattle Spring


Remove the pin hold clip.


b.

Hold down the front disc brake anti-rattle spring and remove the 2 disc brake pad guide pins.


c.

Remove the front disc brake anti-rattle spring.

CAUTION:

Do not remove the 2 disc brake pad guide pins without holding down the front disc brake anti-rattle spring. The front disc brake anti-rattle spring will eject with a force capable of causing injury.



d.

Remove the 2 front disc brake pads from the disc brake cylinder assembly LH.


Hide 04945 4.REMOVE FRONT ANTI-SQUEAL SHIM KIT

a.

Remove the 2 No. 1 anti-squeal shims and 2 No. 2 anti-squeal shims from each front disc brake pad.


Hide 04945 5.INSTALL FRONT ANTI-SQUEAL SHIM KIT

a.
C310921C02
0.354,0.573 0.354,0.25 0.354,0.25 0.677,0.25 false 0.865,1.51 0.865,1.958 false 2.479,1.865 2.479,1 2.479,1 2.75,1 false 3.115,2.802 3.115,3.146 3.115,3.146 2.844,3.146 false 0.813,2 1.125,2.156 0.313,0.156 10 false *1 0.729,0.177 1.042,0.333 0.313,0.156 10 false *2 2.667,3.083 2.979,3.24 0.313,0.156 10 false *2 2.792,0.938 3.104,1.094 0.313,0.156 10 false *1
*1 No. 1 Anti-squeal Shim
*2 No. 2 Anti-squeal Shim
V100135

Disc Brake Grease


Apply disc brake grease to both sides of each No. 1 anti-squeal shim.


b.

Install the 2 No. 1 anti-squeal shims and 2 No. 2 anti-squeal shims to each front disc brake pad.

NOTICE:
·

When replacing worn pads, the shims must be replaced together with the pads.

·

Install the shims in the correct position and direction.




Hide 04465 6.INSTALL FRONT DISC BRAKE PAD

a.
C310932N01
2.156,1.594 2.063,1.896 2.063,1.896 1.885,1.896 false 1.583,1.823 1.927,2.01 0.344,0.188 10 true SST

Using SST, push back the front disc brake piston.

NOTICE:

Do not forcibly install the piston into the front disc brake cylinder.


SST
09719-77020  


b.

Install the 2 front disc brake pads to the disc brake cylinder assembly LH.

NOTICE:

There should be no oil or grease on the friction surface of the pads and disc.



c.

Install the front disc brake anti-rattle spring.


d.

Hold down the front disc brake anti-rattle spring and insert the 2 disc brake pad guide pins.


e.

Install the pin hold clip.


f.

Depress the brake pedal several times.


Hide 8.INSTALL FRONT WHEEL