Home › Brake › BRAKE (REAR) › REAR BRAKE (for Rear Drum Brake)
RM25T0E _54 Brake _029918 BRAKE (REAR) _0138486 REAR BRAKE(for Rear Drum Brake) G

BRAKE (REAR)  REAR BRAKE(for Rear Drum Brake)  INSPECTION  


PROCEDURE

Hide 1.CHECK BRAKE DRUM INSIDE DIAMETER

a.
C312806

Using a brake drum gauge or equivalent, measure the inside diameter of the brake drum.

Standard inside diameter:

295.0 mm (11.614 in.)


Maximum inside diameter:

297.0 mm (11.693 in.)


If the inside diameter is more than the maximum, replace the brake drum.


Hide 04495 2.CHECK BRAKE SHOE LINING THICKNESS

a.
C312807

Using a ruler, measure the thickness of the shoe lining.

Standard thickness:

6.5 mm (0.256 in.)


Minimum thickness:

1.5 mm (0.0591 in.)


If the lining thickness is less than the minimum value, or if there is any severe or uneven wear, replace the brake shoe.

NOTICE:

If the brake shoes need to be replaced, they must be replaced as a set.



Hide 3.CHECK BRAKE DRUM AND BRAKE SHOE LINING FOR PROPER CONTACT

a.
C312808

Apply chalk to the inside surface of the drum, and then grind the brake shoe lining so that it fits together with the drum properly.

If the contact between the drum and the shoe lining is improper, make adjustments using a brake shoe grinder or replace the brake shoe assembly.


Hide 47570 4.CHECK REAR WHEEL BRAKE CYLINDER ASSEMBLY

a.

Check the cylinder bore and piston for rust or scoring.