47319F 1.INSTALL REAR FLEXIBLE HOSE LH
Attach a new clip to the flexible hose.
Connect the flexible hose to the 3-way.
| *a | Torque Wrench Fulcrum Length |
Using a union nut wrench, connect the flexible hose to the brake tube while holding the flexible hose with a wrench.
Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 162 mm (6.3779 in.)): 13.4 N*m (137 kgf*cm, 10 ft.*lbf)
Do not bend or damage the brake tube.
Do not allow any foreign matter such as dirt and dust to enter the brake tube and 3-way from the connecting points.
2.BLEED BRAKE LINE
3.BLEED CLUTCH LINE
Click hereDrivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING