Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81565 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH
Attach the wire harness clamp to install the rear combination light socket and wire sub-assembly LH to the rear combination light lens LH.
81550D 2.INSTALL REAR COMBINATION LIGHT BULB (for Rear Turn Signal Light)
| *1 | Protrusion |
|
Cutout |
Align the 2 protrusions on the side turn signal light bulb with the 2 cutouts of the bulb socket and insert the bulb to the bulb socket.
|
Push |
|
Clockwise |
While pushing the side turn signal light bulb, turn the bulb clockwise to install the bulb.
| *1 | Base Point |
| *2 | Unlock Position Mark |
Align the base point of the bulb socket to the unlock position mark.
Rotate the bulb socket clockwise until the lock to connect it to the rear combination light lens LH.
81550D 3.INSTALL REAR COMBINATION LIGHT BULB (for Backup Light)
| *1 | Protrusion |
|
Cutout |
Align the 2 protrusions on the rear combination light bulb with the 2 cutouts of the bulb socket and insert the bulb to the bulb socket.
|
Push |
|
Clockwise |
While pushing the rear combination light bulb, turn the bulb clockwise to install the bulb.
| *1 | Base Point |
| *2 | Unlock Position Mark |
Align the base point of the bulb socket to the unlock position mark.
Rotate the bulb socket clockwise until the lock to connect it to the rear combination light lens LH.
81550B 4.INSTALL REAR COMBINATION LIGHT BULB (for Tail and Stop Light)
| *1 | Upper Protrusion |
| *2 | Lower Protrusion |
|
Long Cutout |
|
Short Cutout |
Align the upper protrusion of the rear combination light bulb with the short cutout of the bulb socket and the lower protrusion with the long cutout, and then insert the bulb to the bulb socket.
|
Push |
|
Clockwise |
While pushing the rear combination light bulb, turn the bulb clockwise to install the bulb.
| *1 | Base Point |
| *2 | Unlock Position Mark |
Align the base point of the bulb socket to the unlock position mark.
Rotate the bulb socket clockwise until the lock to connect it to the rear combination light lens LH.