Use the same procedure for RH and LH sides.
The procedure listed below is for LH side.
1.REMOVE REAR COMBINATION LIGHT BULB (for Rear Body Side)
| *1 | Base Point |
| *2 | Unlock Position Mark |
|
Counterclockwise |
for Upper Side:
Turn the bulb socket counterclockwise until the base point is aligned with the unlock position mark to disconnect the bulb socket from the rear combination light lens LH.
|
Push |
|
Counterclockwise |
Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.
| *1 | Base Point |
| *2 | Unlock Position Mark |
|
Counterclockwise |
for Center Side:
Turn the bulb socket counterclockwise until the base point is aligned with the unlock position mark to disconnect the bulb socket from the rear combination light lens LH.
|
Push |
|
Counterclockwise |
Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.
| *1 | Base Point |
| *2 | Unlock Position Mark |
|
Counterclockwise |
for Lower Side:
Turn the bulb socket counterclockwise until the base point is aligned with the unlock position mark to disconnect the bulb socket from the rear combination light lens LH.
|
Push |
|
Counterclockwise |
Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.
81561A 2.REMOVE REAR COMBINATION LIGHT LENS LH (for Rear Bumper Side)
Remove the 2 screws and rear combination light lens LH from the rear combination light body LH.
3.REMOVE REAR COMBINATION LIGHT BULB (for Rear Bumper Side)
for Inside:
|
Push |
|
Counterclockwise |
Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body LH.
for Outside:
|
Push |
|
Counterclockwise |
Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body LH.
81565 4.REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH (for Rear Body Side)
Detach the wire harness clamp and remove the rear combination light socket and wire sub-assembly LH from the rear combination light lens LH.
81562A 5.REMOVE REAR COMBINATION LIGHT GASKET LH (for Rear Bumper Side)
Remove the rear combination light gasket LH from the rear combination light body LH.
81569A 6.REMOVE REAR COMBINATION LIGHT BRACKET LH (for Rear Bumper Side, w/ Bracket)
Detach the wire harness clamp.
Remove the screw and rear combination light bracket LH from the rear combination light body LH.
81567B 7.REMOVE REAR COMBINATION LIGHT PROTECTOR LH (for Rear Bumper Side)
Remove the screw and rear combination light protector LH from the rear combination light body LH.
81566 8.REMOVE REAR COMBINATION LIGHT RIM LH (for Rear Bumper Side)
Remove the 3 screws and rear combination light rim LH from the rear combination light body LH.