Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY(for Van)
RM25T0E _59 Vehicle Exterior _029940 LIGHTING (EXT) _0138183 REAR COMBINATION LIGHT ASSEMBLY(for Van) A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY(for Van)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

·

A bolt without a torque specification is shown in the standard bolt chart.



PROCEDURE

Hide 1.INSTALL SCREW GROMMET (for Rear Body Side)

a.

Attach the 2 claws to install a new screw grommet.

HINT:

Use the same procedure to install the screw grommet on the other side.



Hide 2.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH (for Rear Body Side)

a.

Connect the connector.


b.

Pass the wire harness into the vehicle and connect the grommet.


c.

Install the rear combination light assembly LH with the 3 screws.


Hide 81560 3.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH (for Rear Bumper Side)

a.

Install the rear combination light assembly LH with the 2 nuts.


b.

Connect the connector.