Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81615D 1.REMOVE CLEARANCE LIGHT SOCKET
Disconnect the connector.
| *1 | Matchmark |
| *2 | Unlock Position Mark |
Turn the clearance light socket counterclockwise until the matchmark is aligned with the unlock position mark to remove the clearance light socket from the headlight unit assembly LH.
81610F 2.REMOVE CLEARANCE LIGHT BULB
Remove the clearance light bulb from the clearance light socket.
81610F 3.INSTALL CLEARANCE LIGHT BULB
Install the clearance light bulb to the clearance light socket.
81615D 4.INSTALL CLEARANCE LIGHT SOCKET
| *1 | Matchmark |
| *2 | Unlock Position Mark |
| *3 | Lock Position Mark |
Align the matchmark of the clearance light socket to the unlock position mark, and then rotate the clearance light socket clockwise until the lock position mark to install the clearance light socket to the headlight unit assembly LH.
Connect the connector.