Home › Vehicle Exterior › LIGHTING (EXT) › TAILLIGHT BULB(for Van)
RM25T0E _59 Vehicle Exterior _029940 LIGHTING (EXT) _0138562 TAILLIGHT BULB(for Van) A

LIGHTING (EXT)  TAILLIGHT BULB(for Van)  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.DISCONNECT REAR COMBINATION LIGHT ASSEMBLY LH (for Rear Body Side)

a.
E296844

Remove the 3 screws and disconnect the rear combination light assembly LH.


Hide 81561A 2.REMOVE REAR COMBINATION LIGHT LENS LH (for Rear Bumper Side)

a.
E297540

Remove the 2 screws and rear combination light lens LH from the rear combination light body LH.


Hide 3.REMOVE REAR COMBINATION LIGHT BULB

a.
E296848C01
2.115,0.917 2.219,0.458 2.219,0.458 2.979,0.458 true 1.823,1.344 2.99,1.344 true 3.052,1.24 3.292,1.448 0.24,0.208 10 false *1 3.042,0.354 3.354,0.51 0.313,0.156 10 false *2
*1 Base Point
*2 Unlock Position Mark
V100135

Counterclockwise


for Rear Body Side:

i.

Turn the bulb socket counterclockwise until the base point is aligned with the unlock position mark to disconnect the bulb socket from the rear combination light lens LH.


ii.
E296853C01
0,0 0,0 false
V100135

Push
V100137

Counterclockwise


Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.



b.

for Rear Bumper Side:

i.
E298634C01
0,0 0,0 false
V100135

Push
V100136

Counterclockwise


Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body LH.



Hide 4.INSTALL REAR COMBINATION LIGHT BULB (for Rear Body Side)

a.

for Rear Body Side:

i.
E296855C01
0.927,1.135 1.427,1.135 false 2.135,1 2.635,1 false 2.698,0.906 3.01,1.063 0.313,0.156 10 false *1 0.74,1.042 1.052,1.198 0.313,0.156 10 false *2
*1 Upper Protrusion
*2 Lower Protrusion
V100136

Long Cutout
V100137

Short Cutout


Align the upper protrusion of the rear combination light bulb with the short cutout of the bulb socket and the lower protrusion with the long cutout, and then insert the bulb.


ii.
E296854C01
0,0 0,0 false
V100135

Push
V100137

Clockwise


While pushing the rear combination light bulb, turn the bulb clockwise to install the bulb.


iii.
E296850C01
1.354,1.135 0.948,0.552 0.948,0.552 0.448,0.552 true 2.146,1.573 1.76,1.573 1.76,1.573 1.76,1.073 true 0.219,0.458 0.531,0.615 0.313,0.156 10 false *1 2.219,1.469 2.531,1.625 0.313,0.156 10 false *2
*1 Base Point
*2 Unlock Position Mark


Align the base point of the bulb socket to the unlock position mark.


iv.
E296849

Rotate the bulb socket clockwise until the lock to connect it to the rear combination light lens LH.



b.

for Rear Bumper Side:

i.
E296842C01
0.813,1.219 1.365,1.219 false 2.063,1.083 2.615,1.083 false 2.667,0.969 2.979,1.125 0.313,0.156 10 false *1 0.625,1.115 0.938,1.271 0.313,0.156 10 false *2
*1 Upper Protrusion
*2 Lower Protrusion
V100136

Long Cutout
V100137

Short Cutout


Align the upper protrusion of the rear combination light bulb with the short cutout of the rear combination light body LH and the lower protrusion with the long cutout, and then insert the bulb to the rear combination light body LH.


ii.
E298635C01
0,0 0,0 false
V100135

Push
V100136

Clockwise


While pushing the rear combination light bulb, turn the bulb clockwise to install the bulb.



Hide 5.CONNECT REAR COMBINATION LIGHT ASSEMBLY LH (for Rear Body Side)

a.

Connect the rear combination light assembly LH with the 3 screws.


Hide 81561A 6.INSTALL REAR COMBINATION LIGHT LENS LH (for Rear Bumper Side)

a.

Install the rear combination light lens LH to the rear combination light body LH with the 2 screws.