Home › Vehicle Exterior › LIGHTING (EXT) › TAILLIGHT BULB(for Pickup)
RM25T0E _59 Vehicle Exterior _029940 LIGHTING (EXT) _0138567 TAILLIGHT BULB(for Pickup) A

LIGHTING (EXT)  TAILLIGHT BULB(for Pickup)  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RH and LH sides.

·

The procedure listed below is for LH side.



PROCEDURE

Hide 81563C 1.REMOVE REAR COMBINATION LIGHT LENS LH

a.
E296827

Remove the 4 screws and rear combination light lens LH.


Hide 81550B 2.REMOVE REAR COMBINATION LIGHT BULB

a.
E296837C01
0,0 0,0 false
V100135

Push
V100136

Counterclockwise


Push the side rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body.


Hide 81550B 3.INSTALL REAR COMBINATION LIGHT BULB

a.
E296842C01
0.813,1.219 1.365,1.219 false 2.063,1.083 2.615,1.083 false 2.667,0.969 2.979,1.125 0.313,0.156 10 false *1 0.625,1.115 0.938,1.271 0.313,0.156 10 false *2
*1 Upper Protrusion
*2 Lower Protrusion
V100136

Long Cutout
V100137

Short Cutout


Align the upper protrusion of the rear combination light bulb with the short cutout of the rear combination light body and the lower protrusion with the long cutout, and then insert the bulb.


b.
E296838C01
0,0 0,0 false
V100135

Push
V100136

Clockwise


While pushing the rear combination light bulb, turn the bulb clockwise to install the bulb.


Hide 81563C 4.INSTALL REAR COMBINATION LIGHT LENS LH

a.

Install the rear combination light lens LH with the 4 screws.