Home › Vehicle Exterior › LIGHTING (EXT) › TAILLIGHT BULB(for Canvas Top) › 2014.08–2016.08
RM25T0E _59 Vehicle Exterior _029940 LIGHTING (EXT) _0138568 TAILLIGHT BULB(for Canvas Top) A

LIGHTING (EXT)  TAILLIGHT BULB(for Canvas Top)  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.DISCONNECT REAR COMBINATION LIGHT ASSEMBLY LH

a.
E296844

Remove the 3 screws and disconnect the rear combination light assembly LH.


Hide 2.REMOVE REAR COMBINATION LIGHT BULB

a.
E296848C01
2.115,0.917 2.219,0.458 2.219,0.458 2.979,0.458 true 1.823,1.344 2.99,1.344 true 3.052,1.24 3.292,1.448 0.24,0.208 10 false *1 3.042,0.354 3.354,0.51 0.313,0.156 10 false *2
*1 Base Point
*2 Unlock Position Mark
V100135

Counterclockwise


Turn the bulb socket counterclockwise until the base point is aligned with the unlock position mark to disconnect the bulb socket from the rear combination light lens LH.


b.
E296853C01
0,0 0,0 false
V100135

Push
V100137

Counterclockwise


Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.


Hide 3.INSTALL REAR COMBINATION LIGHT BULB

a.
E296855C01
0.927,1.135 1.427,1.135 false 2.135,1 2.635,1 false 2.698,0.906 3.01,1.063 0.313,0.156 10 false *1 0.74,1.042 1.052,1.198 0.313,0.156 10 false *2
*1 Upper Protrusion
*2 Lower Protrusion
V100136

Long Cutout
V100137

Short Cutout


Align the upper protrusion of the rear combination light bulb with the short cutout of the bulb socket and the lower protrusion with the long cutout, and then insert the bulb to the bulb socket.


b.
E296854C01
0,0 0,0 false
V100135

Push
V100137

Clockwise


While pushing the rear combination light bulb, turn the bulb clockwise to install the bulb.


c.
E296850C01
1.354,1.135 0.948,0.552 0.948,0.552 0.448,0.552 true 2.146,1.573 1.76,1.573 1.76,1.573 1.76,1.073 true 0.219,0.458 0.531,0.615 0.313,0.156 10 false *1 2.219,1.469 2.531,1.625 0.313,0.156 10 false *2
*1 Base Point
*2 Unlock Position Mark


Align the base point of the bulb socket to the unlock position mark.


d.
E296849

Rotate the bulb socket clockwise until the lock to connect it to the rear combination light lens LH.


Hide 4.CONNECT REAR COMBINATION LIGHT ASSEMBLY LH

a.

Connect the rear combination light assembly LH with the 3 screws.