Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81278 1.REMOVE LICENSE PLATE LIGHT COVER (except Step Type)
81271 2.REMOVE LICENSE PLATE LIGHT LENS
except Step Type:
Remove the license plate light lens.
for Step Type:
Remove the 2 screws and license plate light lens.
81270B 3.REMOVE LICENSE PLATE LIGHT BULB
|
Push |
|
Counterclockwise |
except Step Type:
Push the license light bulb in the direction indicated by the white arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.
for Step Type:
Remove the license plate light bulb from the bulb socket.
81270B 4.INSTALL LICENSE PLATE LIGHT BULB
| *1 | Protrusion |
|
Cutout |
except Step Type:
Align the 2 protrusions on the license plate light bulb with the 2 cutouts of the bulb socket and insert the bulb to the bulb socket.
|
Push |
|
Clockwise |
While pushing the license plate light bulb, turn the bulb clockwise to install the bulb.
for Step Type:
Install the license plate light bulb to the bulb socket.
81271 5.INSTALL LICENSE PLATE LIGHT LENS
except Step Type:
Install the license plate light lens to the license plate light cover.
for Step Type:
Install the license plate light lens with the 2 screws.
81278 6.INSTALL LICENSE PLATE LIGHT COVER (except Step Type)