Home › Vehicle Exterior › WIPER / WASHER › WIPER LOCK SWITCH
RM25T0E _59 Vehicle Exterior _029939 WIPER / WASHER _0138730 WIPER LOCK SWITCH G

WIPER / WASHER  WIPER LOCK SWITCH  INSPECTION  


PROCEDURE

Hide 84290 1.INSPECT LIMIT SWITCH ASSEMBLY

a.
B383389C01
1.896,1.156 2.51,0.979 true 2.635,0.885 2.948,1.042 0.313,0.156 10 false *1 0.656,0.438 0.969,0.594 0.313,0.156 10 false *a
*1 Terminal 1
*a Component without harness connected
(Limit Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
Terminal 1 - Switch body Pushed 10 kΩ or higher
Not pushed Below 1 Ω


If the result is not as specified, replace the limit switch assembly.