56111 1.CLEAN WINDSHIELD GLASS
Clean the outer circumference of the glass with non-residue solvent.
Do not touch the glass surface after cleaning it.
Be careful not to damage the glass.
Even if using new glass, clean the glass with non-residue solvent.
64829 2.INSTALL BACK WINDOW FRAME FILM (for Slide Type)
Install the 6 back window frame films to the back window frame.
64826 3.INSTALL LOWER BACK WINDOW CHANNEL RUN (for Slide Type)
Install the lower back window channel run to the back window frame.
64825 4.INSTALL UPPER BACK WINDOW CHANNEL RUN (for Slide Type)
Install the upper back window channel run to the back window frame.
64812C 5.INSTALL BACK WINDOW GLASS WEATHERSTRIP (for Slide Type)
Install the back window glass weatherstrip.
64812C 6.INSTALL BACK WINDOW GLASS WEATHERSTRIP (for Slide Type)
Align the grooves on the back window frame and back window glass weatherstrip to install.
64814 7.INSTALL BACK WINDOW CORNER GLASS LH (for Slide Type)
Pull apart the back window frame, install the back window corner glass LH as shown in the illustration
64813 8.INSTALL BACK WINDOW CORNER GLASS RH (for Slide Type)
Use the same procedure described for the back window corner glass LH.
64822A 9.INSTALL BACK WINDOW SLIDE GLASS LH (for Slide Type)
Pull apart the back window frame, install the back window slide glass LH as shown in the illustration.
64821A 10.INSTALL BACK WINDOW SLIDE GLASS RH (for Slide Type)
Use the same procedure described for the back window slide glass LH.
64885 11.INSTALL BACK WINDOW VERTICAL FRAME (for Slide Type)
Install the 2 back window vertical frames with the 2 screws.
64851 12.INSTALL BACK WINDOW SLIDE GLASS STOP (for Slide Type)
Install the back window slide glass stop with the screw.
64812C 13.INSTALL BACK WINDOW GLASS WEATHERSTRIP (for Fixed Type)
Install the back window glass weatherstrip to the back window glass.