Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR
RM25T0E _59 Vehicle Exterior _029939 WIPER / WASHER _0138363 REAR WIPER MOTOR G

WIPER / WASHER  REAR WIPER MOTOR  INSPECTION  


PROCEDURE

Hide 85110R 1.INSPECT REAR WIPER MOTOR ASSEMBLY

E280529C04
1.896,1.917 1.656,1.521 true 1.365,1.083 0.854,0.698 true 0.24,0.292 0.552,0.448 0.313,0.156 10 false *a 1.958,1.865 2.177,2.063 0.219,0.198 10 false +1 0.688,0.573 0.844,0.771 0.156,0.198 10 false E
*a Component without harness connected (Rear Wiper Motor Assembly)


a.

Check that the rear wiper motor assembly operates.

NOTICE:

Check that the body ground is connected.


i.

Apply battery voltage to the rear wiper motor connector and check the speed of the rear wiper motor assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 3 (+1)
Battery negative (-) → Terminal 2 (E)
Motor operates


If the result is not as specified, replace the rear wiper motor assembly.