Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
45287 1.REMOVE LOWER STEERING COLUMN COVER
Removing the lower steering column cover in the incorrect order will cause the parts to break.
While turning the steering wheel to the right and left, remove the 2 screws.
Detach the 2 claws and remove the lower steering column cover.
45286B 2.REMOVE UPPER STEERING COLUMN COVER
Detach the claw and remove the upper steering column cover.
84650 3.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
Disconnect each connector.
Using a screwdriver, detach the claw and remove the windshield wiper switch assembly.
If the claw is pulled with excessive force, it may break.