Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR(for Front RH Side)
RM25T0E _59 Vehicle Exterior _029939 WIPER / WASHER _0138079 WASHER MOTOR(for Front RH Side) G

WIPER / WASHER  WASHER MOTOR(for Front RH Side)  INSPECTION  


PROCEDURE

Hide 85310 1.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

HINT:

This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.


a.

With the windshield washer motor and pump assembly installed to the washer jar, pour windshield washer fluid into the washer jar.


b.
B383398C01
2.042,1.146 2.5,1.479 false 2.073,1 2.479,0.813 false 0.563,0.396 0.875,0.552 0.313,0.156 10 false *a 2.615,1.438 2.771,1.635 0.156,0.198 10 false 2 2.573,0.719 2.729,0.917 0.156,0.198 10 false 1
*a Component without harness connected (Windshield Washer Motor and Pump Assembly)


Check that the windshield washer fluid is pumped when battery voltage is applied to the terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Washer fluid is pumped


If the result is not as specified, replace the windshield washer motor and pump assembly.