Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Rear)
RM25T0E _59 Vehicle Exterior _029939 WIPER / WASHER _0138368 WASHER MOTOR(for Rear) G

WIPER / WASHER  WASHER MOTOR(for Rear)  INSPECTION  


PROCEDURE

Hide 85310R 1.INSPECT REAR WASHER MOTOR ASSEMBLY

HINT:

This check should be performed with the rear washer motor assembly installed to the rear washer jar assembly.


a.

With the rear washer motor assembly installed to the washer jar, pour rear washer fluid into the washer jar.


b.
B383398C01
2.042,1.146 2.5,1.479 false 2.073,1 2.479,0.813 false 0.563,0.396 0.875,0.552 0.313,0.156 10 false *a 2.615,1.438 2.771,1.635 0.156,0.198 10 false 2 2.573,0.719 2.729,0.917 0.156,0.198 10 false 1
*a Component without harness connected (Rear Washer Motor Assembly)


Check that the rear washer fluid is pumped when battery voltage is applied to the terminals.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Washer fluid is pumped


If the result is not as specified, replace the rear washer motor assembly.