85035R 1.INSPECT REAR WASHER NOZZLE SUB-ASSEMBLY
With the ignition switch turned to ON check that the center stream of washer fluid sprays on the back door glass RH within the hatched area shown in the illustration.
Washer fluid hits the back door glass RH in the area shown in the illustration.
| *a | Ceramic Edge |
|
Washer Fluid Spray Area |
| Area | Specified Condition | Area | Specified Condition |
|---|---|---|---|
| A | 410 mm (16.1417 in.) | B | 210 mm (8.2677 in.) |
| C | 285 mm (11.2205 in.) | D | 130 mm (5.1181 in.) |
| E | 100 mm (3.9370 in.) | - | - |
If the result is not as specified, adjust the rear washer nozzle.
Click hereVehicle Exterior>WIPER / WASHER>WASHER NOZZLE(for Rear Side)>ADJUSTMENT
If the adjustment result is not as specified, replace the rear washer nozzle.