for Sub-cool Accelerator:
When removing the cooler expansion valve, be sure to replace the installation bolts of the cooler expansion valve and the air conditioner tube and accessory assembly with new bolts.
except Sub-cool Accelerator:
When removing the cooler expansion valve, be sure to replace the installation bolts of the cooler expansion valve and the No. 1 cooler refrigerant suction hose and cooler refrigerant liquid pipe C with new bolts.
1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
88712 2.DISCONNECT NO. 1 COOLER REFRIGERANT SUCTION HOSE (except Sub-cool Accelerator)
88716C 3.DISCONNECT COOLER REFRIGERANT LIQUID PIPE C (except Sub-cool Accelerator)
88710E 4.DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (for Sub-cool Accelerator)
88515 5.REMOVE COOLER EXPANSION VALVE
Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.
| *a | 6 mm Bolt |
Temporarily install the 6 mm bolt halfway to the cooler expansion valve.
Hold the bolt and pull it to remove the cooler expansion valve as shown in the illustration.
Remove the 2 O-rings.