Home › General › INTRODUCTION › REPAIR INSTRUCTION
RM25T0E _V1 General _030611 INTRODUCTION _0140189 REPAIR INSTRUCTION F

INTRODUCTION  REPAIR INSTRUCTION  VEHICLE LIFT AND SUPPORT LOCATIONS  


NOTICE ABOUT VEHICLE CONDITION WHEN RAISING VEHICLE


a.

The vehicle must be unloaded before jacking up or raising the vehicle. Never jack up or raise a heavily loaded vehicle.


b.

When removing any heavy components like the engine or transaxle, the vehicle center of gravity will shift. To stabilize the vehicle, place a balance weight in a location that will prevent the vehicle from rolling or shifting, or place a transmission jack under the appropriate jack position at the opposite end of the vehicle.



NOTICE FOR USING 4 POST LIFT


a.

Follow the safety procedures outlined in the lift's instruction manual.


b.

Do not damage the tires or wheels while driving onto the lift.


c.

Use wheel chocks to secure the vehicle.



NOTICE FOR USING JACK AND SAFETY STANDS


a.

Work on a level surface. Use wheel chocks at all times.


b.

Use safety stands with rubber attachments as shown in the illustration.


c.

Set the jack and safety stands exactly under the specified locations on the vehicle.


d.

When jacking up the vehicle, first release the parking brake and move the shift lever to N.


e.

When jacking up the entire vehicle:

i.

When jacking up the front wheels first, make sure wheel chocks are behind the rear wheels.


ii.

When jacking up the rear wheels first, make sure wheel chocks are in front of the front wheels.



f.

When jacking up only the front or rear wheels of the vehicle:

i.

Before jacking up the front wheels, place wheel chocks on both sides of the rear wheels.


ii.

Before jacking up the rear wheels, place wheel chocks on both sides of the front wheels.



g.

When lowering a vehicle that only has its front or rear wheels jacked up.

D223147E02
0.981,1.941 1.437,2.126 0.457,0.186 10 Front 0.981,4.367 1.437,4.553 0.457,0.186 10 Front 0.981,6.705 1.437,6.890 0.457,0.186 10 Front 0.133,0.428 2.452,0.613 2.319,0.186 12 for Model Code #J71 Series: 0.133,2.844 2.381,3.030 2.248,0.186 12 for Model Code #J76 Series: 0.133,5.246 2.877,5.431 2.744,0.186 12 for Model Code #J79 Series: 0.086,0 1.626,0.186 1.540,0.186 12 w/o Rear Stabilizer: 0.927,7.579 6.935,8.002 6.008,0.423 10 Do not use the swing arm type lift and plate type lift. Otherwise, the vehicle may fall since its center of gravity is toward the front of the vehicle. 0.119,7.579 0.863,7.763 0.744,0.184 10 CAUTION:

D105074

JACK POSITION
·

Front: Under the front differential

·

Rear: Under the rear differential


CAUTION:

When jacking up the vehicle, make sure the vehicle is not carrying any extra weight.


D105075

SUPPORT POSITION

Safety stand


-
D106048

SCREW TYPE JACK POSITION -

D223148E03
0.906,1.99 1.354,2.188 0.448,0.198 10 false Front 0.354,0.406 2.531,0.604 2.177,0.198 12 false for Model Code #J76 Series: 0.896,4.677 1.344,4.875 0.448,0.198 10 false Front 0.354,3.073 3.854,3.271 3.5,0.198 12 false for Model Code #J78 Series, #J79 Series: 0.094,0 1.5,0.198 1.406,0.198 12 false w/ Rear Stabilizer: 0.99,5.771 7,6.198 6.01,0.427 10 false Do not use the swing arm type lift and plate type lift. Otherwise, the vehicle may fall since its center of gravity is toward the front of the vehicle. 0.177,5.771 0.917,5.958 0.74,0.188 10 false CAUTION:

D105074

JACK POSITION
·

Front: Under the front differential

·

Rear: Under the rear differential


CAUTION:

When jacking up the vehicle, make sure the vehicle is not carrying any extra weight.


D105075

SUPPORT POSITION

Safety stand


-
D106048

SCREW TYPE JACK POSITION -

i.

Before lowering the front wheels, make sure wheel chocks are in front of the rear wheels.


ii.

Before lowering the rear wheels, make sure wheel chocks are behind the front wheels.