Use the same procedure for the LH and RH side.
The procedures listed below are for the LH side.
71086B 1.REMOVE REAR SIDE SEAT CUSHION COVER SUB-ASSEMBLY LH (for Rear No. 2 Side Seat Assembly LH)
w/ Rear No. 2 Seat Inner Belt Assembly:
Remove the 18 hog rings.
w/o Rear No. 2 Seat Inner Belt Assembly:
Remove the 2 pieces of fastening tape.
Remove the 16 hog rings.
Remove the rear side seat cushion cover sub-assembly LH and rear No. 2 side seat cushion pad LH.
71089C 2.REMOVE REAR NO. 2 SIDE SEATBACK COVER SUB-ASSEMBLY LH (for Rear No. 2 Side Seat Assembly LH)
Remove the 6 hog rings.
While pulling up the rear No. 2 side seatback cover sub-assembly LH, remove the 4 hog rings.
Remove the rear No. 2 side seatback cover sub-assembly LH.
Remove the 7 hog rings and rear No. 2 side seatback pad LH.
72660A 3.REMOVE REAR SEAT CUSHION SUPPORT ASSEMBLY (for Rear No. 2 Side Seat Assembly LH)
w/ Rear No. 2 Seat Inner Belt Assembly:
Remove the 2 bolts, 2 spacers, and rear seat cushion support assembly from the rear No. 2 side seat cushion leg sub-assembly LH.
79929A 4.REMOVE NO. 2 FOLD SEAT LEG SUPPORT FRAME (for Rear No. 2 Side Seat Assembly LH)
| *1 | Clip Remover |
w/ Rear No. 2 Seat Inner Belt Assembly:
Using clip remover, remove the 2 spring nuts and 4 plate washers.
Remove the No. 2 fold seat leg support frame.
71034B 5.REMOVE REAR NO. 2 SIDE SEAT CUSHION LEG SUB-ASSEMBLY LH (for Rear No. 2 Side Seat Assembly LH)
Using a screwdriver, remove the 2 E-rings and 2 pins.
Remove the rear No. 2 side seat cushion leg sub-assembly LH from the rear No. 2 side seat frame assembly LH.
71086B 6.REMOVE REAR SIDE SEAT CUSHION COVER SUB-ASSEMBLY LH (for Rear Side Seat Assembly LH)
w/ Rear No. 2 Seat Inner Belt Assembly:
Remove the 18 hog rings.
w/o Rear No. 2 Seat Inner Belt Assembly:
Remove the Fastening tape.
Remove the 16 hog rings.
Remove the rear side seat cushion cover sub-assembly LH and rear side seat cushion pad LH.
71089B 7.REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH (for Rear Side Seat Assembly LH)
Remove the 6 hog rings.
While pulling up the rear side seatback cover sub-assembly LH, remove the 4 hog rings.
Remove the rear side seatback cover sub-assembly LH from the rear side seat frame assembly LH.
Remove the 7 hog rings and rear side seatback pad LH.
72660A 8.REMOVE REAR SEAT CUSHION SUPPORT ASSEMBLY (for Rear Side Seat Assembly LH)
w/ Rear No. 2 Seat Inner Belt Assembly:
Remove the 2 bolts, 2 spacers, and rear seat cushion support assembly from the rear No. 1 side seat cushion leg sub-assembly LH.
79929 9.REMOVE FOLD SEAT LEG STOPPER FRAME (for Rear Side Seat Assembly LH)
| *1 | Clip Remover |
w/ Rear No. 2 Seat Inner Belt Assembly:
Using clip remover, remove the 2 spring nuts and 4 plate washers.
Remove the fold seat leg stopper frame.
71034A 10.REMOVE REAR NO. 1 SIDE SEAT CUSHION LEG SUB-ASSEMBLY LH (for Rear Side Seat Assembly LH)
w/ Rear No. 2 Seat Inner Belt Assembly:
Using a screwdriver, remove the 2 E-rings and 2 pins.
w/o Rear No. 2 Seat Inner Belt Assembly:
Using a screwdriver, remove the 2 E-rings, 2 pins and 2 torsion springs.
Remove the rear No. 1 side seat cushion leg sub-assembly LH.