Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY(for Semi-long Body)
RM25T0E _58 Vehicle Interior _029930 SEAT _0140344 REAR NO. 2 SEAT ASSEMBLY(for Semi-long Body) A

SEAT  REAR NO. 2 SEAT ASSEMBLY(for Semi-long Body)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH and RH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 71034A 1.INSTALL REAR NO. 1 SIDE SEAT CUSHION LEG SUB-ASSEMBLY LH

B384196

a.

Install the rear No. 1 side seat cushion leg sub-assembly LH and 2 pins with 2 new E-rings.


Hide 71761B 2.INSTALL REAR SIDE SEATBACK PAD LH

a.
B384202C01
1.927,2.917 2.01,2.385 false 1.917,2.188 2.125,2.365 0.208,0.177 10 false *1
*1 Hog Ring Pliers


Using hog ring pliers, install the rear side seatback pad LH and 6 new hog rings to the rear side seat frame assembly LH.

NOTICE:
·

Be careful not to damage the rear side seatback pad LH.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 71089B 3.INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH

a.
B385564C01
2.021,3.615 2.167,3.188 false 2.146,3.031 2.458,3.229 0.313,0.198 10 false *1
*1 Hog Ring Pliers


Using hog ring pliers, install the rear side seatback cover sub-assembly LH to the rear side seat frame assembly LH with 4 new hog rings.

NOTICE:
·

Be careful not to damage the rear side seatback pad LH.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




b.
B382609C01
1.885,2.74 2.094,2.156 false 0.542,2.708 1.177,2.229 true 2.052,1.99 2.365,2.188 0.313,0.198 10 false *1 0.354,2.635 0.667,2.833 0.313,0.198 10 false *a
*1 Hog Ring Pliers
*a Cutout


Install 5 new hog rings.

NOTICE:
·

Be careful not to damage the rear side seatback pad LH.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.



HINT:

Install the hog rings at the cutouts if they are there.



Hide 71722 4.INSTALL REAR SIDE SEAT CUSHION PAD LH

a.

Install the rear side seat cushion pad LH.


Hide 71085B 5.INSTALL REAR SIDE SEAT CUSHION COVER SUB-ASSEMBLY RH (for RH Side)

a.
B384203C01
1.854,2.74 2.125,1.979 false 0.448,2.823 1.177,2.198 true 0.271,2.76 0.583,2.958 0.313,0.198 10 false *a 2.094,1.833 2.406,2.031 0.313,0.198 10 false *1
*1 Hog Ring Pliers
*a Cutout


Using hog ring pliers, install the rear side seat cushion cover sub-assembly RH to the rear side seat frame assembly RH with 15 new hog rings.

NOTICE:
·

Be careful not to damage the rear side seat cushion pad RH.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.



HINT:

Install the hog rings at the cutouts if they are there.



b.

Install the 2 pieces of fastening tape.


Hide 71086B 6.INSTALL REAR SIDE SEAT CUSHION COVER SUB-ASSEMBLY LH (for LH Side)

B382604C01
1.865,2.729 2.031,2.229 false 0.531,2.854 1.177,2.208 true 2,2.083 2.313,2.281 0.313,0.198 10 false *1 0.354,2.792 0.667,2.99 0.313,0.198 10 false *a
*1 Hog Ring Pliers
*a Cutout


a.

Using hog ring pliers, install the rear side seat cushion cover sub-assembly LH to the rear side seat frame assembly LH with 14 new hog rings.

NOTICE:
·

Be careful not to damage the rear side seat cushion pad LH.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.



HINT:

Install the hog rings at the cutouts if they are there.



b.

Install the 2 pieces of fastening tape.