Use the same procedure for the LH and RH side.
The procedures listed below are for the LH side.
71086B 1.REMOVE REAR SIDE SEAT CUSHION COVER SUB-ASSEMBLY LH
w/ Rear No. 2 Seat Inner Belt Assembly:
Remove the 18 hog rings.
w/o Rear No. 2 Seat Inner Belt Assembly:
Remove the 2 pieces of fastening tape.
Remove the 16 hog rings.
Remove the rear side seat cushion cover sub-assembly LH and rear side seat cushion pad LH from the rear side seat frame assembly LH.
71089B 2.REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH
Remove the 6 hog rings.
While pulling up the rear side seatback cover sub-assembly LH, remove the 4 hog rings.
Remove the rear side seat seatback cover sub-assembly LH from the rear side seat frame assembly LH.
Remove the 7 hog rings and rear side seatback pad LH.
71034A 3.REMOVE REAR NO. 2 SIDE SEAT CUSHION LEG SUB-ASSEMBLY LH
Using a screwdriver, remove the 2 E-rings and 2 pins.
Remove the 2 torsion springs.
Remove the rear No. 2 side seat cushion leg sub-assembly LH from the rear side seat frame assembly LH.