Use the same procedure for the LH side and RH side.
The procedures listed below are for the LH side.
71034A 1.INSTALL REAR NO. 2 SIDE SEAT CUSHION LEG SUB-ASSEMBLY LH
Install the torsion spring and one side of the rear No. 2 side seat cushion leg sub-assembly LH with the 2 pins and 2 new E-rings as shown in the illustration.
71089B 2.INSTALL REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH
| *1 | Hog Ring Pliers |
Using hog ring pliers, install the rear side seatback pad LH to the rear side seat frame assembly LH with 7 new hog rings.
Be careful not to damage the rear side seatback pad LH.
When installing the hog rings, take care to minimize wrinkles as much as possible.
| *1 | Hog Ring Pliers |
Using hog ring pliers, install the rear side seatback cover sub-assembly LH to the rear side seat frame assembly LH with 4 new hog rings.
Be careful not to damage the rear side seatback pad LH.
When installing the hog rings, take care to minimize wrinkles as much as possible.
Using hog ring pliers, install the rear side seatback cover sub-assembly LH to the rear side seat frame assembly LH with 6 new hog rings.
| *1 | Hog Ring Pliers | - | - |
| *a | Cutout | - | - |
Be careful not to damage the rear side seatback pad LH.
When installing the hog rings, take care to minimize wrinkles as much as possible.
Install the hog rings at the cutouts if they are there.
71086B 3.INSTALL REAR SIDE SEAT CUSHION COVER SUB-ASSEMBLY LH
Install the rear side seat cushion pad LH to rear side seat cushion frame sub-assembly LH.
| *1 | Hog Ring Pliers |
| *a | Cutout |
w/ Rear No. 2 Seat Inner Belt Assembly:
Using hog ring pliers, install the rear side seat cushion cover sub-assembly LH to the rear side seat frame sub-assembly LH with 18 new hog rings.
Be careful not to damage the rear side seat cushion pad LH.
When installing the hog rings, take care to minimize wrinkles as much as possible.
Install the hog rings at the cutouts if they are there.
| *1 | Hog Ring Pliers |
| *a | Cutout |
w/o Rear No. 2 Seat Inner Belt Assembly:
Using hog ring pliers, install the rear side seat cushion cover sub-assembly LH to the rear side seat frame assembly LH with 16 new hog rings.
Be careful not to damage the rear side seat cushion pad LH.
When installing the hog rings, take care to minimize wrinkles as much as possible.
Install the hog rings at the cutouts if they are there.
Install the 2 pieces of fastening tape.