47931 1.REMOVE LOAD SENSING VALVE BRACKET
Remove the 2 nuts A and set plate B from the load sensing proportioning valve.
Remove the nut C, bolt D and load sensing proportioning valve bracket E from the load sensing proportioning valve.
47910 2.REMOVE LOAD SENSING PROPORTIONING VALVE
Using pliers, remove the clip and load sensing proportioning valve.
47933 3.REMOVE NO. 1 LOAD SENSING SHACKLE BRACKET
| *1 | No. 1 Load Sensing Shackle Bracket |
| *2 | Plate Washer |
| *3 | Load Sensing Spring Shackle Bush |
| *4 | Load Sensing Spring Shackle Collar |
Remove the nut, No. 1 load sensing shackle bracket, plate washer, 2 load sensing spring shackle bushes and load sensing spring shackle collar.
47920 4.REMOVE LOAD SENSING SPRING ASSEMBLY
| *1 | Load Sensing Spring Shackle Heat Insulator |
| *2 | No. 1 Load Sensing Spring Shackle |
Remove the nut, bolt and load sensing spring shackle heat insulator, and then disconnect the load sensing spring from the No. 1 load sensing spring shackle.
| *1 | No. 1 Load Sensing Spring Bush |
| *2 | No. 2 Load Sensing Spring Bush |
| *3 | Plate Washer |
| *4 | Load Sensing Spring Collar |
| *5 | Load Sensing Spring Washer |
| *6 | Load Sensing Valve Boot |
| *7 | Load Sensing Spring Boot |
Remove the 4 plate washers, 2 No. 1 load sensing spring bushes, 2 No. 2 load sensing spring bushes, 2 load sensing spring collars and 2 load sensing spring washers from the load sensing spring.
Remove the load sensing valve boot and load sensing spring boot from the load sensing spring.
47935 5.INSTALL NO. 1 LOAD SENSING SPRING SHACKLE
| *1 | No. 1 Load Sensing Spring Shackle |
Remove the lock nut and No. 1 load sensing spring shackle from the No. 2 load sensing spring shackle.
47936 6.INSTALL NO. 2 LOAD SENSING SPRING SHACKLE
Remove the adjusting nut from the No. 2 load sensing spring shackle.